Up

_SETcurlOptionFile

Set some CURL options with a file value.

Prototype :

fun [ObjCURL I P] ObjCURL

• ObjCURL : a Curl object

• I : the CURL option listed here http://curl.haxx.se/libcurl/c/curl_easy_setopt.html (not all supported)

  These following options should be currently supported (only options with a file value) :
  CURLOPT_VERBOSE, CURLOPT_HEADER, CURLOPT_NOPROGRESS, CURLOPT_NOSIGNAL, CURLOPT_WILDCARDMATCH,
  CURLOPT_ERRORBUFFER, CURLOPT_FAILONERROR, CURLOPT_URL, CURLOPT_PROTOCOLS, CURLOPT_REDIR_PROTOCOLS,
  CURLOPT_PROXY, CURLOPT_PROXYPORT, CURLOPT_PROXYTYPE, CURLOPT_NOPROXY, CURLOPT_HTTPPROXYTUNNEL,
  CURLOPT_SOCKS5_GSSAPI_SERVICE, CURLOPT_SOCKS5_GSSAPI_NEC, CURLOPT_INTERFACE, CURLOPT_LOCALPORT,
  CURLOPT_LOCALPORTRANGE, CURLOPT_DNS_CACHE_TIMEOUT, CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPT_BUFFERSIZE,
  CURLOPT_PORT, CURLOPT_TCP_NODELAY, CURLOPT_ADDRESS_SCOPE, CURLOPT_TCP_KEEPALIVE, CURLOPT_TCP_KEEPIDLE,
  CURLOPT_TCP_KEEPINTVL, CURLOPT_NETRC, CURL_NETRC_OPTIONAL, CURL_NETRC_IGNORED, CURL_NETRC_REQUIRED,
  CURLOPT_NETRC_FILE, CURLOPT_USERPWD, CURLOPT_PROXYUSERPWD, CURLOPT_USERNAME, CURLOPT_PASSWORD, CURLOPT_PROXYUSERNAME,
  CURLOPT_PROXYPASSWORD, CURLOPT_HTTPAUTH, CURLAUTH_BASIC, CURLAUTH_DIGEST, CURLAUTH_DIGEST_IE, CURLAUTH_GSSNEGOTIATE, CURLAUTH_NTLM, CURLAUTH_NTLM_WB, CURLAUTH_ANY, CURLAUTH_ANYSAFE, CURLAUTH_ONLY, CURLOPT_TLSAUTH_TYPE,
  CURLOPT_TLSAUTH_USERNAME, CURLOPT_TLSAUTH_PASSWORD, CURLOPT_PROXYAUTH, CURLOPT_AUTOREFERER, CURLOPT_ACCEPT_ENCODING,
  CURLOPT_TRANSFER_ENCODING, CURLOPT_FOLLOWLOCATION, CURLOPT_UNRESTRICTED_AUTH, CURLOPT_MAXREDIRS, CURLOPT_POSTREDIR,
  CURL_REDIR_POST_301, CURL_REDIR_POST_302, CURL_REDIR_POST_303, CURL_REDIR_POST_ALL, CURLOPT_PUT, CURLOPT_POST,
  CURLOPT_POSTFIELDS, CURLOPT_POSTFIELDSIZE, CURLOPT_POSTFIELDSIZE_LARGE, CURLOPT_COPYPOSTFIELDS, CURLOPT_HTTPPOST,
  CURLOPT_REFERER, CURLOPT_USERAGENT, CURLOPT_HTTPHEADER, CURLOPT_HTTP200ALIASES, CURLOPT_COOKIE, CURLOPT_COOKIEFILE,
  CURLOPT_COOKIEJAR, CURLOPT_COOKIESESSION, CURLOPT_COOKIELIST, CURLOPT_HTTPGET, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_NONE,
  CURL_HTTP_VERSION_1_0, CURL_HTTP_VERSION_1_1, CURLOPT_IGNORE_CONTENT_LENGTH, CURLOPT_HTTP_CONTENT_DECODING, CURLOPT_HTTP_TRANSFER_DECODING,
  CURLOPT_MAIL_FROM, CURLOPT_MAIL_RCPT, CURLOPT_MAIL_AUTH, CURLOPT_TFTP_BLKSIZE, CURLOPT_FTPPORT, CURLOPT_QUOTE, CURLOPT_POSTQUOTE,
  CURLOPT_PREQUOTE, CURLOPT_DIRLISTONLY, CURLOPT_APPEND, CURLOPT_FTP_USE_EPRT, CURLOPT_FTP_USE_EPSV, CURLOPT_FTP_USE_PRET, CURLOPT_FTP_CREATE_MISSING_DIRS,
  CURLOPT_FTP_RESPONSE_TIMEOUT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SKIP_PASV_IP, CURLOPT_FTPSSLAUTH, CURLFTPAUTH_DEFAULT,
  CURLFTPAUTH_SSL, CURLFTPAUTH_TLS, CURLOPT_FTP_SSL_CCC, CURLFTPSSL_CCC_NONE, CURLFTPSSL_CCC_PASSIVE, CURLFTPSSL_CCC_ACTIVE,
  CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_FILEMETHOD, CURLFTPMETHOD_MULTICWD, CURLFTPMETHOD_NOCWD, CURLFTPMETHOD_SINGLECWD, CURLOPT_RTSP_REQUEST,
  CURL_RTSPREQ_OPTIONS, CURL_RTSPREQ_DESCRIBE, CURL_RTSPREQ_ANNOUNCE, CURL_RTSPREQ_SETUP, CURL_RTSPREQ_PLAY, CURL_RTSPREQ_PAUSE, CURL_RTSPREQ_TEARDOWN,
  CURL_RTSPREQ_GET_PARAMETER, CURL_RTSPREQ_SET_PARAMETER, CURL_RTSPREQ_RECORD, CURL_RTSPREQ_RECEIVE, CURLOPT_RTSP_SESSION_ID,
  CURLOPT_RTSP_STREAM_URI, CURLOPT_RTSP_TRANSPORT, CURLOPT_RTSP_CLIENT_CSEQ, CURLOPT_RTSP_SERVER_CSEQ,
  CURLOPT_TRANSFERTEXT, CURLOPT_PROXY_TRANSFER_MODE, CURLOPT_CRLF, CURLOPT_RANGE, CURLOPT_RESUME_FROM, CURLOPT_RESUME_FROM_LARGE,
  CURLOPT_CUSTOMREQUEST, CURLOPT_FILETIME, CURLOPT_NOBODY, CURLOPT_INFILESIZE, CURLOPT_INFILESIZE_LARGE, CURLOPT_UPLOAD,
  CURLOPT_MAXFILESIZE, CURLOPT_MAXFILESIZE_LARGE, CURLOPT_TIMECONDITION, CURLOPT_TIMEVALUE, CURLOPT_TIMEOUT, CURLOPT_TIMEOUT_MS,
  CURLOPT_LOW_SPEED_LIMIT, CURLOPT_LOW_SPEED_TIME, CURLOPT_MAX_SEND_SPEED_LARGE, CURLOPT_MAX_RECV_SPEED_LARGE, CURLOPT_MAXCONNECTS,
  CURLOPT_CLOSEPOLICY, CURLOPT_FRESH_CONNECT, CURLOPT_FORBID_REUSE, CURLOPT_CONNECTTIMEOUT, CURLOPT_CONNECTTIMEOUT_MS,
  CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER, CURL_IPRESOLVE_V4, CURL_IPRESOLVE_V6, CURLOPT_CONNECT_ONLY, CURLOPT_USE_SSL,
  CURLUSESSL_NONE, CURLUSESSL_TRY, CURLUSESSL_CONTROL, CURLUSESSL_ALL, CURLOPT_RESOLVE, CURLOPT_DNS_SERVERS,
  CURLOPT_ACCEPTTIMEOUT_MS, CURLOPT_SSLCERT, CURLOPT_SSLCERTTYPE, CURLOPT_SSLKEY, CURLOPT_SSLKEYTYPE, CURLOPT_KEYPASSWD,
  CURLOPT_SSLENGINE, CURLOPT_SSLENGINE_DEFAULT, CURLOPT_SSLVERSION, CURL_SSLVERSION_DEFAULT, CURL_SSLVERSION_TLSv1, CURL_SSLVERSION_SSLv2,
  CURL_SSLVERSION_SSLv3, CURLOPT_SSL_VERIFYPEER, CURLOPT_CAINFO, CURLOPT_ISSUERCERT, CURLOPT_CAPATH, CURLOPT_CRLFILE, CURLOPT_SSL_VERIFYHOST,
  CURLOPT_CERTINFO, CURLOPT_RANDOM_FILE, CURLOPT_EGDSOCKET, CURLOPT_SSL_CIPHER_LIST, CURLOPT_SSL_SESSIONID_CACHE, CURLOPT_SSL_OPTIONS,
  CURLSSLOPT_ALLOW_BEAST, CURLOPT_KRBLEVEL, CURLOPT_GSSAPI_DELEGATION, CURLOPT_SSH_AUTH_TYPES, CURLSSH_AUTH_PUBLICKEY, CURLSSH_AUTH_PASSWORD,
  CURLSSH_AUTH_HOST, CURLSSH_AUTH_KEYBOARD, CURLSSH_AUTH_ANY, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPT_SSH_PUBLIC_KEYFILE,
  CURLOPT_SSH_PRIVATE_KEYFILE, CURLOPT_SSH_KNOWNHOSTS, CURLOPT_NEW_FILE_PERMS, CURLOPT_NEW_DIRECTORY_PERMS, CURLOPT_TELNETOPTIONS

• P : the read-reference file value

Return : ObjCURL the same Curl object if success, NIL otherwise

See also :