$HEADER

"AR capture stereo" PlugIT

Augmented Reality Capture plugIT for stereo cameras

 

Parameters

1

Type of stereoscopic camera

2

Distance between the two lenses (in centimeters)

3

Cameras images size

4

Automatic cameras size

5

Enable camera focus on touch for mobile devices

6

Enable mobile device torch on start

7

Left camera device index

8

Use left camera default intrinsics

9

Manual X and Y focal values

10

Manual X and Y center values

11

Right camera device index

12

Use right camera default intrinsic

13

Manual X and Y focal values

14

Manual X and Y center values


 

Parameters

15

Check this box if you want the camera to be a texture. Otherwise, it will be displayed as an overlay

16

Define the concerned object name

17

Defines the concerned material name

18

Defines the concerned technique name

19

Defines the concerned technique pass name

20

Defines the concerned texture name

21

Check this case if you want the camera to display in background

22

Move the image on X

23

Move the image on Y

24

Image witdh

25

Image height

26

Defines the image opacity

27

Mode of the camera matrix. Auto, Enable or Disable the match of the virtual camera to the camera lens deformations

28

Connects the device on start

29

Displays the camera image at startup


 

Actions

Set torch on

Turns on the torchlight if available.

Set torch off

Turns off the torchlight.

Get devices list

Activate the "Devices list" event for listing the connected camera device.

Set size

Set the camera image size. For this, edit the applied link and add values in the form of W H (for example : 320 200).

Set position

Set the camera image position. For this, edit the applied link and add values in the form of X Y (for example : 10 25).

Set camera size

Change the size of the device camera.

Get camera size

Send the camera device size values.

Hide

Hide the camera picture

Show

Show the camera picture

Disconnect

Stop the camera device

Connect

Start the camera device


 

Events

Disconnected

Sends when the camera is disconnected.

Connected

Sends when the camera is connected.

Devices list

Retreive the connected video devices list.

camera size

Send the video size.

$FOOTER