Warning : This plugIT is deprecated and isn't distributed anymore. You must use the "OpenVR Controller" PlugIT instead.
This PlugIT allows to connect a virtual reality headset Oculus Rift.
Plus d’informations : www.oculusvr.com
Parameters |
|
1 |
Set the 3D render resolution. "Default" doesn't apply any changement and "Auto" lowers the 3D render resolution as long as the 75 FPS resolution is not reached. |
2 |
Enable or disable the low image persistence mode of the Oculus Rift. The "Auto" mode disable it if the render velocity is lower than 75 FPS. |
3 |
Connect the oculus Rift when the application starts. |
Action |
|
Reset |
Reset rotation datas of the Oculus Rift. |
Enable |
Enable the Oculus Rift, it connects the headset and activate the dedicated stereoscopic mode. |
Disable |
Disable the Oculus Rift, it disconnects the headset and disable the dedicated stereoscopic mode. |
Event |
|
Connected |
Sends when the headset connects to the computer. |
Disconnected |
Sends when the headset disconnects to the computer. |
Control |
Report the head tracker orientation value to the defined format for the navigation PlugITs. |
Orientation |
Report the head tracker orientation value. |
Position |
Report the head tracker position value. |
You can use this PlugIT in order to control the camera orientation. Just link the "Control" event to the "Control" action of a navigation PlugIT for that.
$FOOTER