The "Input mixer" PlugIT allows to combine several plugIT outputs into a single formatted one.
Parameters |
|
1 |
Number of inputs to combine. |
2 |
Format of the output.you can use the dynamic variables from the input links with the "$" followed by the letter of the input to use and the number of the parameter to use. |
3 |
The condition for the output to be automatically triggered : |
4 |
Time interval between two triggering of the output for the "at each fixed interval of time" option. |
5 |
If checked, the automatic triggering of the output will start on application startup. |
Event |
|
Formatted output |
Result of the combination of the inputs according to the provided format |
Action |
|
Enable |
Enables the automatic triggering of the output. |
Disable |
Disables the automatic triggering of the output. |
Get formatted output |
Triggers the formatted output (événement "Formatted output"). |
Input A/B/C/... |
Inputs for the plugIT outputs to combine. Increase the number of inputs in the plugIT to increase the number of actions available. |
Reset |
Resets the values of the inputs and the count of the "each time an input is received" and "after receiving each input at least once" modes. |