The GPIO RGB led plugIT allows to control an RGB LED from the Raspberry PI GPIO pins.
Parameters |
|
1 |
Raspberry PI GPIO pin number connected to the red pin of the RGB LED. |
2 |
Raspberry PI GPIO pin number connected to the green pin of the RGB LED. |
3 |
Raspberry PI GPIO pin number connected to the blue pin of the RGB LED. |
4 |
Set the default LED color. |
5 |
Turn the LED on at startup. |
Actions |
|
On |
Turn on the LED. |
Off |
Turn off the LED. |
Set color |
Change the LED color, the color is set in link parameter in the "R G B" format like "0 255 0" for example or in hexadecimal format "00ff00". |
