Set the camera LOD bias, this allow to force the LOD (Level Of Distance) of the scene from the selected camera view.
Parameters |
|
1 |
The camera name affected by the LOD bias. |
2 |
The multiplication factor over distance, 1.0 for normal behavior, less than 1.0 to reduce the distance from degradation of objects. |
3 |
Enable the LOD bias on the camera on application start. |
Actions |
|
Set LOD bias |
Define the LOD bias value in the link parameter. |
Disable |
Disable the LOD bias on the camera. |
Enable |
Enable the LOD bias on the camera. |